You have reached the Creality Rundown (3D Printer Course), your one-stop shop for being the master of your Creality FDM 3D Printer. Whether you’re a new owner of your printer and you have just unpacked the bundle, or you’re one of those who have had to build the printer from components, or you’ve had a go at your first prints and are stuck, this course has been designed for you. Gregg Cerenzio, a baseline tech professional over 25 years and affiliated with Creality, is joining me, and you are in good company.
I have spent ample time helping owners of 3D printers over the Internet; I know the problems and the headaches they face. From this wealth of experience, I have designed the basic to the advanced course on 3D printing, where you will be taken through the basics and the step-by-step procedures to taking your printing to the next level. Slicer software, various problems that may occur during the print – I’ll make sure you know how to work with all of it in order to obtain the best results every time.
In simple language and practical demonstrations in Creality Rundown (3D Printer Course), I will enable you to stand out and not just be an owner of a 3D printer but a master able to realise your ideas on the printer to perfection. For all Absolute Beginners who want to improve their 3D Printing skills or even the already skilled who want to make their prints beautiful from spaghetti, enroll for Creality Rundown (3D Printer Course).
Creality Rundown (3D Printer Course) Table of Contents:
- Why you should take a 3D printer course with me? (03:03)
- Slicing your 1st model with Creality Print 4.x (13:42)
- Update Creality Print (01:27)
- Making Holes and Shapes in a Model (04:59)
- Intro to Creality Print 5 (20:19)
- How to use ORCA SLICER on Creality K1, K1C, K1 MAX, (and others) (08:40)
- Complete K1 Unboxing, and Setup (26:15)
- Install the K1 AI Camera, and create your first Time Lapse (07:47)
- K1 MAX Unboxing and Build (13:26)
- K1 MAX Setup and 1st Test Print (13:43)
- How to Clean and Lube the X/Y Rails (11:09)
- Making & Accessing a Timelapse video on Creality K1, K1C, K1 MAX (01:14)
- Changing the Filament (02:21)
- Ender 3 V3 - Step By Step Unboxing & Assembly (13:36)
- CR10-SE Unboxing and Assembly (18:51)
- CR10-SE Setup (19:58)
- Creating a Profile for Creality Print 5.0 (08:13)
- Updating the firmware (07:27)
- Ender 3 V3 KE: Unboxing, and assembly (19:45)
- Ender 3 V3 KE: Setup, Config, Test Print, Timelapse (17:58)
- Tensioning the Belts, on the Ender 3 V3 SE or KE (04:15)
- Installing the LED Light on Ender 3 V3 KE or SE (11:08)
- Ender 3 S1: Unboxing and Assembly (23:01)
- Ender 3 S1: Replace, or Upgrade, the Nozzle (03:53)
- Full Tune up, to resolve a laundry list of S1 (and similar) problems (21:09)
- Switching to a Glass Bed (06:41)
- CR-10 Smart Unboxing (13:01)
- CR10-Smart Setup (25:07)
- Space Pi Filament Dryer Overview (14:45)
- SETUP (08:43)
- Replace the FEP (10:17)
- Print to the Mage Pro from Creality Cloud (03:23)
- Unboxing & Close Look (07:45)
- Adding a Spacer, for proper CR-TOUCH probe height (08:46)
Who is this course for?
- Newcomers in the world of 3D printing who have no prior knowledge about 3D printing.
- People are struggling to pull good prints and look for ways to rectify the situation.
- Aimed at professionals who could not find opportunities to develop and perfect their skills in using 3D printing.
- People facing the problem of sticking to the bed require assistance in achieving optimal adhesion of the prints.
- People who want to be aware of the efficient methods of cutting STL files, which leads to favorable printing results.
